!!!! Get a Find Shop Goulds GT15 Irrigator - 1.5 hp Irrigation Pump

### Get a Hot Offers Goulds GT15 Irrigator - 1.5 hp Irrigation Pump

Goulds GT15 Irrigator - 1.5 hp Irrigation Pump Info

Products Brand : Goulds Pumps
Saving Price : Click Here! >>

You may have time to decide to not very much. We offer you to hurry check item price.

Goulds GT15 Irrigator - 1.5 hp Irrigation Pump Details

FEATURES:
Self-Priming Design: Once pump is initially primed, filled with water, it will reprime when the water level rises above the end of the suction pipe.
Serviceable:
? Back pullout design allows disassembly of pump for service without disturbing piping.
? Two compartment motor for easy access to motor wiring and replaceable components.
Diffuser (Guidevane): Bolt down diffuser provides positive alignment with impeller. Diffuser has stainless wear ring for extended performance in abrasive conditions. F.D.A. compliant, injection molded, food grade, glass filled Lexan® for durability and abrasion resistance.
Impeller: F.D.A. compliant, glass filled Noryl®. Corrosion and abrasion resistant.
Corrosion Resistant: Electro-coat paint process is applied inside and out, then baked on.
Casing: Cast iron construction. Four (4) bolt, back pull-out design. Tapped openings provided for vacuum gauge and casing drain.
Powered for Continuous Operation: Pump ratings are within the motor manufacturer's recommended working limits.
Can be operated continuously without damage.
Mechanical Seal: Carbon/ceramic faces, BUNA elastomers. 300 series stainless steel metal parts. Pump design prevents the seal from running dry.

APPLICATIONS: Specifically designed for the following uses:
? Lawn sprinkling
? Irrigation
? Air conditioning systems
? Heat pumps
? Water transfer
? Dewatering

GENERAL GT SERIES SPECIFICATIONS
Pump:
? Pipe connections:
1½" NPT suction
1½" NPT discharge
? Capacities: to 110 GPM at 5 foot suction lift
? Heads: to 128 feet
? Reprime capabilities: to 25 feet suction lift
? Maximum working pressure: 125 PSIG
? Maximum water temperature: 140° F (60° C)
? Rotation: clockwise when viewed from motor end.
Motor:
? NEMA standard open drip proof
? 60 Hz, 3500 RPM
? Stainless steel shaft
? Single phase: ¾-1½ HP, 115/230 V; 2 and 3 HP, 230 V only. Built-in overload with automatic reset.

Self priming irrigation pump

Powered for continuous operation

Can operate in either 115 or 230 volts

1 1/2" NPT suction & discharge connections

See More Details >>